Driver Installation Guide; Installing Windows Vista; Vista Tm 64-Bit / Xp / Xp 64-Bit Without Raid Functions; Installing Windows Functions - ASROCK B75 Pro3-M User Manual

2.17 Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from top to bottom to
install those required drivers. Therefore, the drivers you install can work properly.
2.18 Installing Windows
TM
Vista 64-bit / XP / XP 64-bit Without RAID Functions
If you want to install Windows
/ XP 64-bit OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please
follow the procedures below according to the OS you install.
2.18.1 Installing Windows
Functions
If you want to install Windows
HDDs without RAID functions, please follow the steps below.
AHCI mode is not supported under Windows
Using SATA / SATA2 / SATA3 HDDs without NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode Selection" to [IDE]. (For SATA2_1 to SATA2_5 and
SATA3_0 ports.)
Set the option "ASMedia SATA3 Mode" to [IDE]. (For SATA3_A0 and SATA3_A1
ports.)
STEP 2: Install Windows
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
XP / XP 64-bit Without RAID
®
XP / XP 64-bit OS on your SATA / SATA2 / SATA3
Advanced screen
®
XP / XP 64-bit OS on your system.
44
TM
TM TM
/ Vista 64-bit / XP
®
XP / XP 64-bit.
Storage Configuration.
/