2.12 Serial ATA2 (SATA2) Hard Disks Installation
This motherboard adopts Intel
disks. You may install SATA2 hard disks on this motherboard for internal storage
devices. This section will guide you to install the SATA2 hard disks.
STEP 1: Install the SATA2 hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA2 hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATA2 con-
nector.
STEP 4: Connect the other end of the SATA data cable to the SATA2 hard disk.
2.13 Serial ATA3 (SATA3) Hard Disks Installation
This motherboard adopts Intel
hard disks for SATA3_0 connector. It also adopts ASMedia ASM1061 chipset that
supports Serial ATA3 (SATA3) hard disks for SATA3_A0 and SATA3_A1 connectors.
You may install SATA3 hard disks on this motherboard for internal storage devices.
This section will guide you to install the SATA3 hard disks.
STEP 1: Install the SATA3 hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA3 hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATA3 con-
nector.
STEP 4: Connect the other end of the SATA data cable to the SATA3 hard disk.
®
B75 chipset that supports Serial ATA2 (SATA2) hard
®
B75 chipset that supports Serial ATA3 (SATA3)
40