Information Display During Playback - Hitachi DZ-HS500SW Instruction Manual

INFORMATION DISPLAY DURING PLAYBACK

Various types of information on recording will be superimposed on playback image you are viewing.
No display
●Switching the information display
mode
Press the DISPLAY button: You can switch the
display mode of on-screen information.
When using HDD/DVD:
Recording mode
Scene No.
06 006
Programme No. or Play List No.
*1
Programme or Play List
When using card:
Scene No. File name
1 0 0 — 0 0 0 3
0 0 3
Recording mode
*4
Lock
HDD HDD
Playback information
display
*4
Repeat play
00:00:16
Playback
*5
operation
Counter
*3
HDD, Disc type
*2
*4
Slide Show
*5
Playback operation
*1
Programme or
*2
Number of programme or play list being
played back (not displayed when all
programmes are being played back).
*3
Refer to "HDD, DVD/Card type" on page 45.
*4
Will appear when each function is specified
"On".
*5
: Standard playback
: Playback pause
: Forward search playback
: Reverse search playback
: Forward skip playback
: Reverse skip playback
: Forward frame advance
: Reverse frame back
: Forward slow playback
: Reverse slow playback
See pages 69-71 for how to operate.
The " " mark will appear on the first image
on disc.
The " " mark will appear on the last image
on disc.
• Recording date/time display: Shows the date/
time when recording was started. Even when
playback starts, the date/time display will not
advance.
• No display: No information will appear.
However, when the mode of playback
operation is switched, the symbol will appear
for approx. 3 seconds.
:
Note
See page 94 and after for "Programme", page 97 and
after for "Play List".
9:30
1/ 3 / 2007
Recording date/time
Play List.
73