Table of Contents
Advertisement
Symptom
"Hardware Removal"
results in error.
No USB HS (high
speed) connection even
when USB2.0 card is
used.
Miscellaneous
Symptom
No DVD video camera/
recorder operation.
Power does not come
on, or no operation
occurs by pressing
button.
The date and time are
incorrect.
Pressing the SLEEP/
RESTART button will
not set to the sleep/
restart standby status.
No scene can be
deleted.
Disc cannot be
removed.
(Cover will not open.)
Disc cover cannot be
closed.
150
Cause and Correction
®
Exit Windows
once, and then disconnect the DVD video camera/
recorder. If your PC uses Windows
problem may be solved if you install Windows
Make sure that you have already installed the driver provided with
the USB2.0 card.
You will need to install the driver provided by USB2.0 card maker
in order to operate the USB2.0 card at HS (high speed).
Cause and Correction
Is a fully charged battery attached?
Is the DVD video camera/recorder powered from AC outlet?
Execute system reset (press the RESET button).
Has the DVD video camera/recorder been subjected to impact?
The DVD video camera/recorder could be damaged. Consult your
dealer.
Has the DVD video camera/recorder been left unused for a long
period of time?
The internal backup memory battery may be discharged:
Charge it.
• Is the proper disc or card loaded?
• Does the HDD, disc or card have remaining free space?
• Is the DVD video camera/recorder now playing back?
• Is Disc Navigation screen displayed?
Is the cursor placed on the scene to be deleted?
If the selected scene (framed in red) exists, that scene will be
deleted even if you use yellow cursor to select any scene. Check
the colours of cursors and bar graph on the thumbnail screen.
Did you detach the battery or AC adapter/charger before setting
the power switch to "OFF"?
Is the battery charged?
Connect a charged battery or the AC adapter/charger, and then
press the DISC EJECT button to remove the disc.
Did the DVD video camera/recorder turn off because the battery
remaining level ran out?
Connect a charged battery or the AC adapter/charger, set the
power switch to "OFF", and then press the DISC EJECT button to
remove the disc.
Is the power switch set to "HDD" or "SD"?
Set the power switch to "DVD" or "OFF", and then press the DISC
EJECT button.
Is disc correctly inserted?
Was disc inserted from wrong direction?
Remove the disc and then reinsert it.
Connect a fully charged battery or AC adapter/charger, and then
turn the DVD video camera/recorder on.
®
2000 Professional, the
®
2000 SP3 or later.
Reference
page
126
—
Reference
page
25, 26
152
—
32
42
74, 84
25, 26, 30
37
25, 27
Advertisement
Table of Contents
