Table of Contents
Advertisement
DI-206 ISDN Remote Router
PROM System Configuration
The PROM program is run before the normal console (runtime)
configuration program in the router's Flash Memory. Thus, the PROM
System Configuration can be used if there are problems with the
router's console program.
Specifically, the PROM Configuration program has procedures to
initialize the administration parameters and the LAN IP address of the
router in order to allow the console software in the router's flash
memory to be replaced if it has been damaged or deleted.
To enter the PROM System Menu, press Ctrl+C during the Router's
POST procedure. The following menu will appear:
PROM System Configuration
143
Advertisement
Table of Contents
