System > Dhcp Auto Configuration; System > Syslog Host; System > Time Profile - D-Link DGS-1210-16 Reference Manual

Configuration
System > DHCP Auto Configuration
This window allows you to enable the DHCP Auto Configuration feature on the Switch. When enabled, the
Switch becomes a DHCP client and gets the configuration file from a TFTP server automatically on next boot
up. To accomplish this, the DHCP server must deliver the TFTP server IP address and configuration file
name information in the DHCP reply packet. The TFTP server must be up and running and store the
necessary configuration file in its base directory when the request is received from the Switch.
System > SysLog Host
System Logs record and manage events, as well as report errors and informational messages. Message
severity determines a set of event messages that will be sent. Click Enabled to configure the related settings
of the remote system log server, and click Apply for the changes to take effect.
Server IP Address: Specifies the IPv4 or IPv6 address of the system log server.
UDP Port: Specifies the UDP port to which the server logs are sent. The possible range is from 1 to 65535.
The default value is 514.
Time Stamp: Select Enabled to time stamp log messages.
Severity: Specifies the minimum severity from which warning messages are sent to the server. There are
three levels. When a severity level is selected, all severity level choices above the selection are selected
automatically. The possible levels are:
Warning - The lowest level of a device warning. The device is functioning, but an operational
problem has occurred.
Informational - Provides device information.
All - Displays all levels of system logs.
Facility: Specifies an application from which system logs are sent to the remote server. Only one facility can
be assigned to a single server. If a second facility level is assigned, the first facility is overwritten. There are
up to eight facilities can be assigned (Local 0 to Local 7).
System > Time Profile
The Time Profile window allows users to configure the time profile settings of the device.
Figure 4.22 – System > DHCP Auto Configuration
Figure 4.23 – System > SysLog Host Settings
2 9
2 9
D-Link Web Smart Switch User Manual