LG 32PG6000 Service Manual page 8

5. Manual Model Name Download
(1) Press ADJ key on R/C for model name D/L
(2) Select ". Model Option" and press ENTER(
(3) Insert Option value by a number key
V
(4) Press the ENTER(
6. Manual ADC Adjustment
[ Caution
- Do not connect external input cable
- Adjustment result is applied to SET On/Off later.
RF Input
NO SIGNAL or White noise
[ Adjustment is done using internal ADC, so input signal is
not necessary.
(1) Press ADJ key on R/C for adjustment.
(2) Select "2. ADC calibration" by using
V
press ENTER( ).
(3) Select "Start' by using
V
ENTER( ).
(4) ADC adjustment is executed automatically.
7. Manual EDID Download
(1) Press the ADJ KEY on R/C and enter EZ ADJUST.
(2) Select "5. EDID D/L" by using
V
ENTER( ).
(3) Select "Start" and press ENTER(
(4) EDID download is executed automatically.
(5) Press EXIT key on R/C.
Copyright©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
V
)
)
AV / Component / RGB input
NO SIGNAL
D E
/ (CH +/-) and
F G
/ (VOL +/-) and press
D E
/ (CH +/-) and press
V
).
8. EDID Data
(1) HDMI 1 (256 bytes)
(2) RGB (128 bytes)
=> Detail EDID Options are below( , , ,
1. -> Product ID
2. -> Serial No : Controlled on production line
3. -> Month, Year : Controlled on production line
- 8 -
)
LGE Internal Use Only