Col Auto Answering - Panasonic Easa-Phone VA-208 Installation Manual

KEY TELEPHONE SETTINGS
INTERCOM CALL DURING CONVERSATION
Step 4
4a.
4b.
Step 5
Step 6
Activate only one (1) of the following options:
To set the TEL Station to receive INTERCOM INCOMING CALL DURING
CONVERSATION, depress the SPKR button, if extinguished, to light the LED lamp.
OR
To set the TEL Station to not receive INTERCOM INCOMING CALL DURING
CONVERSATION, depress the SPKR button, if on, to extinguish the LED lamp.
Depress the # button on the Dial Pad to store the program established in Step 4.
Proceed to next feature program or depress FLASH button and SPKR button in sequence to end programming
mode.
COL AUTO ANSWERING
This feature enables an incoming call on either COL 1 or COL 2 to be automatically connected to the TEL Station by picking
up the handset without depressing the COL button. Each TEL Station must be individually programmed for COL AUTO
ANSWERING.
NOTE: Only one TEL Station can be programmed at a time. To change the COL AUTO ANSWERING on multiple TEL
Stations, complete Steps 1 thru 5 for the first TEL Station and then repeat Steps 3 thru 5 for each remaining TEL
.
Station you wish to change.
0 The initial program setting is for all TEL Stations to have AUTO ANSWERING.
0 To change the program setting, perform the following steps:
Step 1 Place the system in the programming mode. See instructions in the General Operational Procedures.
Step 2 Place TEL Station 1 in the programming mode by depressing the SPKR button.
Step 3
Dial the Feature Program Activation Code for the particular TEL Station to be programmed.
For TEL Station l-Dial Feature Program Activation Code m p]
q
For TEL Station e--Dial Feature Program Activation Code F\ p[ p]
For TEL Station 3-Dial Feature Program Activation Code Fi p\ p]
For TEL Station 4-Dial Feature Program Activation Code F\ pl
q
For TEL Station 5-Dial Feature Program Activation Code /%l b] m
For TEL Station 6-Dial Feature Program Activation Code
q q q
For TEL Station T-Dial Feature Program Activation Code m p] b]
For TEL Station 8-Dial Feature Program Activation Code F] r] PI
.
33