Transmatic Tractors 800 Series - MTD Garden Tractors User Manual

For Parts Call 606-678-9623 or 606-561-4983
f. Remove the belt keeper assembly by remov-
ing the four self-tapping screws which hold
the belt keeper assembly to the frame at the
engine pulley.
g. Loosen the pin at the idler pulley and remove
the electric clutch by removing the center
bolt and washer. See Figure 4-47.
CAUTION
Be careful not to drop the electric clutch as it is
heavy.
www.mymowerparts.com
h. Place the clutch/brake pedal in park position.
Remove the belt from the engine pulley.
i. Move the variable speed pulley as necessary
in order to remove the belt.
When reassembling, make certain belt is inside
the pins. See Figure 4-48.
j. Reassemble with a new belt following
instructions in reverse order.
k. Check the adjustment of the speed control
as instructed.

4-9. TRANSMATIC TRACTORS 800 SERIES.

4-9.1 The 800 Series tractor is available with two dif-
ferent drive systems.
1. Yard tractor with the heavy duty single speed
transmission. See Figure 4-49.
Continued on page 4-32.
4-27
NOTE
4