Brother TD-2020 User Manual page 113

c
Insert the RD Roll so that the labels feed
with the side to be printed on facing up
(1), as shown.
1
 Use RD Rolls with a maximum outer
dimension of 5" (127 mm) or less.
Use RD Rolls designed for TD
series printers. Regardless of the
size, some RD Rolls may not be
usable.
 Insert the RD Roll facing the correct
direction. If the RD Roll is not
inserted correctly, the printer will not
print on the correct side of the paper
or label.
 When using media with the labels
rolled up on the inside, insert the roll
in the opposite direction of that
shown in step c so that the print
side of the labels will face up.
Using the Label Peeler (Optional:PA-LP-001) (TD-2120N/2130N only)
d
While lifting up the media guide
adjustment lever (1), push in both media
guides (2) to fit the width of the paper.
e
Feed the end of the RD Roll under the
media tip guides (1).
1
1
2
13
107