Brother TD-2020 User Manual page 101

 For configuring wireless LAN
settings, a USB cable must
temporarily be used. Prepare the
included USB cable.
 Before beginning the installation,
you must know the SSID and
network key of your WLAN access
point/router.
We cannot assist you with your

network policy (or its settings).
Consult with your network
administrator.
Please do not contact Brother
Customer Service for assistance on
security settings.
NOTE
• The SSID is required for configuring
wireless settings. Network key information
is also required, except in an open system
(a network with no password). In addition,
if WEP is used for encryption, a WEP key
is required.
• Finding the SSID and network key:
• Since network information such as the
SSID, network key and WEP key are
settings customized for your
environment, contact your network
administrator. If you have specified the
settings, refer to the manual for your
WLAN access point/router.
• In addition, if your wireless LAN is set
to stealth mode, a connection cannot
be established with the network using
the procedures described here;
therefore, contact your network
administrator.
• To see the MAC address for your
printer, print its device settings. For
details, see Printing the Printer Setup
Information on page 19.
Using the WLAN Interface (Optional:PA-WI-001) (TD-2120N/2130N only)
a
Before beginning the installation, you
must know the SSID and network key of
your WLAN access point/router.
Make a note of your settings in order to
remember the specified information.
Refer to the following table.
Item
SSID
(network name)
Network key*
(security
key/encryption key)
*The network key may also be
described as the password, security key
or encryption key.
b
Insert the installer CD-ROM into your
CD-ROM drive. If the language screen
appears, choose your language.
NOTE
®
• For Windows XP/Windows
® ®
Vista /Windows 7:
If the installer screen does not
automatically appear, display the contents
of the CD-ROM drive folder, and then
double-click [start.exe].
®
• For Windows 8:
If the installer screen does not
automatically appear, click [Run
start.exe] in the [Start] screen, or display
the contents of the CD-ROM drive folder
from the desktop, and then double-click
[start.exe].
c
Click [Standard Installation].
d
Read the license agreement, and click
[Agree] if you agree with the terms and
conditions.
e
Click [Install] to start the installation,
and then follow the on-screen
instructions.
Setting
95
11