Table of Contents
Advertisement
251824352_myX-4_lu_en.book Page 42 Lundi, 13. décembre 2004 4:58 16
WAP
Preferred connections:
GSM if not GPRS (by default): the logon to WAP services uses the GPRS as
a priority. However, in the event of unavailability of the GPRS network, the
GSM network is used to establish the link.
GPRS: the logon to WAP services uses the GPRS network exclusively.
GSM: the logon to WAP services uses the GSM network exclusively.
GSM parameters:
- Login
- Password
- IP address of WAP gateway
- Port type (secure or insecure)
- Dial-up number
- Mode (digital, analog or automatic)
GPRS parameters:
- Login
- Password
- IP address of WAP gateway
- Port type (secure or insecure)
- APN: if no APN has been defined, press [Options] then the APN menu.
Select or add an APN.
Once all the settings have been entered, you can activate the chosen access
provider. Select him from the list. Validate your choice.
Linger timer is used to choose the time after which the call is automatically
disconnected if you have forgotten to log off from a service.
42
Advertisement
Table of Contents
