Setting Up A Wireless Connection Manually - Huawei HG630a User Manual

The WPS indicator on the HG630a starts blinking, indicating that the
WPS negotiation is in progress.
Step 2 Enable the WPS negotiation function on the computer within 2
minutes.
Wait for a while, the WPS indicator on the HG630a stops blinking and
turns steady on, indicating that a wireless connection is set up
between the HG630a and computer.
You need to wait for 10~120 seconds.

The WPS indicator is on for about 300 seconds and then turns off.


3.2 Setting Up a Wireless Connection Manually

If your network adapter does not support the WPS function, you can also set up
a wireless connection manually. The following example uses a computer
running the Window XP operating system to describe how to set up a wireless
connection using the default wireless network name and password:
Step 1
Enable the wireless configuration service provided by Windows XP.
1. Right-click My Computer to display a short-cut menu, and choose
Manage.
2. In the Computer Management window, choose Computer
Management (Local) > Services and Applications > Services.
3. Right-click Wireless Zero Configuration to display a shortcut menu,
and choose Properties.
4. Check that Service status is Started. If Service status is not Started,
click Start.
5. Click OK to close the dialog box, and then close the Computer
Management window.
Step 2
Record the wireless network name (SSID) and its password (WLAN
Key) printed on the label on the HG630a's rear panel.
If the default wireless network name and password have been
changed, use the new ones.
Step 3
Configure the wireless network connection on the computer as
follows:
8