Setting Up A Wireless Connection Using The Wps Button; Setting Up A Wireless Connection Manually - Huawei HG532e User Manual

3.1 Setting Up a Wireless Connection Using the
WPS Button
The HG532e supports the Wi-Fi Protected Setup (WPS) function in Push
Button Configuration (PBC) mode. If your wireless network adapter also
supports the WPS function, do the following to connect your computer to the
HG532e wirelessly:
Step 1 Press and hold the WPS button for over 1 second on the side panel of
the HG532e.
The WPS indicator on the HG532e starts blinking, indicating that the
HG532e is in the WPS negotiation state.
Step 2 Within 2 minutes, enable the WPS negotiation function on the
computer.
Wait for a while. The WPS indicator of the HG532e stops blinking and
remains on, indicating that a wireless connection is set up between the
HG532e and the computer.
You need to wait for 10 seconds to 120 seconds.

The WPS indicator is on for about 300 seconds, and then turns off.


3.2 Setting Up a Wireless Connection Manually

If your network adapter does not support the WPS function, you can set up
a wireless connection manually.
The following example uses a computer running the Windows XP operating
system to describe how to set up a wireless connection using the
default wireless network name and password:
Step 1 Start the wireless configuration service of the Windows XP operating
system as follows:
1. Right-click My Computer to display a short-cut menu, and choose
Manage.
2. In the Computer Management window, choose Computer
Management (Local) > Services and Applications > Services.
6