Modulator (Only Itd60); Digital Output (Only Itd64); Reinstallation - Reset - Sagem ITD 62 User Manual

ITD61_UK.qxd 10/11/04
5. ADVANCED BOX SETTINGS

5-3-3 Modulator (Only ITD60)

If you want to adjust the channel for an another TV set:
• directly access the menu,
• choose the channel (21 to 69) by entering the
number,
• choose the standard of your country (B/G, I or K).
The channel is factory set to 38.

5-3-4 Digital output (Only ITD64)

A number of choices are available.
Scroll through the choices using cursors
• Home cinema : Send AC3 audio data to the digital
output when available (*)
• Stereo: Send to the digital output stereo audio
data
Default configuration is stereo.
(*) If no AC3 audio data are available default audio track will be played

5-4 REINSTALLATION - RESET

Use this option only if you have to start the complete
installation procedure all over again. If you continue
from here, all your previous settings, access code and
favourite channels, etc. will be erased!
If you do not want to perform a reinstallation, you
can leave this menu when the warning is displayed
by pressing the BACK or EXIT key.
9:24 Page 17
or
10
TV AND VCR SETTING
TV SCREEN FORMAT 4/3
TV RGB OUTPUT MEDIUM
VCR STANDARD S-VIDEO
YES
MODULATOR SETTINGS
PAL B/G
OUTPUT STANDARD
CHANNEL OUTPUT SELECTION 38
TV AND VCR SETTING
TV SCREEN FORMAT 4/3 Panscan
TV RGB OUTPUT MEDIUM
VCR STANDARD S-VIDEO
DIGITAL OUTPUT
HOME CINEMA
RESET
ALL CURRENT CHANNELS AND SETTINGS
WILL BE LOST WILL BE LOST
PRESS OK TO CONFIRM PRESS OK O CONFIRM
Panscan