Picture Adjustments - Panasonic TH-50PB2W Operating Instructions Manual

Picture Adjustments

1
2
Select to adjust each item.
Picture
Normalise Normal
Normal
Picture Mode
25
Contrast
0
Brightness
Colour 0
0
Hue
Sharpness 5
White balance Normal
Advanced settings
Press to enter
Advanced settings.
Advanced settings
Enables fi ne picture adjustment at a professional
level (see next page).
Advanced settings
Normalise Normal
Black extension
Input level
Gamma
W/B High R
W/B High G
W/B High B
W/B Low R
W/B Low G
W/B Low B
Helpful Hint (
While the "Picture" menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during "Normalise", then all adjustment values are returned to the factory settings.
26
Press to display the Picture menu.
Press to select the menu to adjust.
Select the desired level by looking at the picture behind the menu.
Note:
Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal,
input and menu setting.
0
0
2.2
0
0
0
0
0
0
/ Normalisation)
Normalise
Press " " or " " button to switch between modes.
Normal
Monitor
Normal
For viewing in standard (evening lighting) environments.
This menu selects the normal levels of Brightness
and Contrast.
Dynamic
For viewing in brighter environments.
This menu selects higher than normal levels of
Brightness and Contrast.
Cinema
For use in viewing tone-focused pictures with
brightness reduced.
Monitor
For use when creating broadcast or movie content.
With this picture, even if the overall average picture
level (APL) changes, the brightness of areas with
the same signal level does not change.
Picture Mode during Touch Pen mode
Only "Normal" or "Dynamic" can be selected in
Picture Mode during Touch Pen mode.
Notes:
• When "Monitor" is selected in Picture Mode, the
following menu items cannot be set.
Extended life settings: Peak limit (see page 40)
• If you would like to change the picture and colour of
the selected Picture menu to something else, adjust
using the items in the Picture menu. (see next page)
Press " " or " " button to switch between modes.
Normal (9300K) Cool (11500K)
Dynamic
Cinema
Warm (6500K)