Understanding the Status Indicators
The Graphics to SDI property page banner indicates the status of the SDI output as well
as the external synchronization signals.
indicators on the banner and the actual connectors.
Figure 4.1 Connection Status Indicators
The activity of the LED graphics indicates the signal status as follows:
Vid. 1 Out or Vid. 2 Out
Status
Meaning
Off (gray)
SDI output is not in use
Steady Green
SDI output has power.
Blinking Green
SDI output is active.
Input
Status
Meaning
Off (gray)
SDI input synchronization is disabled.
Blinking Green
Valid SDI synchronization signal is detected.
Quadro K4000/K5000/K6000 SDI
Chapter 04 : Linux—Using the Graphics to Video Out Control Panel
Figure 4.1
Graphics to Video Out banner
shows the correlation between the
Quadro SDI Connector Bracket LEDs
DU-05337-002_v01
|
39