Chapter 03 : Windows–Using the Graphics to SDI Control Panel
Allowing Application Control of the SDI Output
The SDI application programming interface allows OpenGL applications to have full and
exclusive control of the SDI output.
Refer to the Quadro SDI Output Programmer's Guide for instructions on using the APIs.
When an application requests control of the SDI card it will disable any configured SDI
settings.
Once the application is running and the SDI output is under application control, you can
view the SDI settings and check the status using the Manage SDI Output Settings page.
Figure 3.4 Manage SDI Output Settings Page—Application Control
Quadro K4000/K5000/K6000 SDI
DU-05337-002_v01
|
28