Garrett PD 6500i User Manual page 37

PrOGrAM
Airports
Schools
Courthouses
Buildings
Special Events
Airports Enhanced
Airports Enhanced - 2
AENA-1
AENA-2
ECAC
STAC
Nuclear
Prisons
Loss Prevention 1
Loss Prevention 2
Loss Prevention 3
Loss Prevention 4
Loss Prevention 5
Loss Prevention 6
Alternate
Figure 4-2 - Programs Chart
© 2008 Garrett Metal Detectors
PD 6500i User MANUAL
Designed primarily for detection of guns and other such weapons. Ex-
ceeds FAA detection requirements (i.e. FAA 3-gun test). Provides excellent
discrimination against innocuous items such as coins, keys, jewelry,
shoe-shanks, cigarette packs, foil, etc. Recommended for applications
requiring general weapons detection while providing high traffic through-
put with minimal nuisance alarms.
Designed for the detection of guns as well as knives and
other flat or rod-shaped weapons. Meets the Transportation Security
Administration's (TSA) Enhanced walk-through Metal Detector (EMD)
requirements and European Airport requirements and exceeds FAA re-
quirements. Provides good discrimination against innocuous items such
as coins, keys, jewelry, cigarette packs, foil, etc. Recommended for
applications requiring comprehensive detection of guns and knives while
providing moderate traffic throughput with low-to-moderate nuisance
alarms.
A specialized weapons detection program designed to detect all metals
and provide the highest level of security available. Exceeds FAA and TSA
detection requirements. Provides no discrimination against innocuous
items and is therefore recommended for applications which allow low
traffic throughput.
Loss prevention programs one to six are used to detect metals ranging
from conductive and/or non-ferrous to non-conductive and/or ferrous re-
spectively. Loss Prev1 is designed to detect all metals, particularly good
conductors such as jewelry, computer components and most coins. Loss
Prev 2 is similar to Loss Prev1 except it is designed to ignore poor con-
ductors, such as cigarette or chewing gum foil and keys. Loss Prev3 to
6 are designed to detect items that are increasingly less conductive and
more ferrous (i.e., contain more iron), e.g., Loss Prev3 to 5 detects most
weapons; Loss Prev6 is most recommended for detecting steel tools.
Low–moderate throughput.
See Figure 4-1 for a graph representing detection capabilities of Loss
Prevention programs, Loss Prev1 to Loss Prev6.
For use as an alternative under difficult environmental conditions, includ-
ing electrical interference. A general weapons program that provides mod-
erate discrimination against pocket items while offering the best balanced
response to all metals. Meets FAA requirements (i.e., three-gun test).
37
DesCrIPTION / Use
PN 1532010 REV F1