Insert the notched end of the DIMM into the socket. Press the DIMM firmly, and pivot it until it snaps into
place. Make sure that it is firmly installed in the slot and does not move easily.
1040 Keyboard
For access, remove this FRU:
•
"1010 Battery pack" on page 62
Removal steps of keyboard
Step
Icon
1
Slightly press the keyboard and slide it a little bit forward in the direction shown by arrow
front edge of the keyboard from the frame. Then, lift up the keyboard in the direction shown by arrow
Screw (quantity)
M2 × 5 mm, wafer-head, nylon-coated (2)
Color
Torque
Black
0.181 Nm
(1.85 kgfcm)
2
.
Chapter 8
Removing and replacing a FRU
to detach the
3
.
67