Lenovo IdeaPad Flex 14 Hardware Maintenance Manual page 58

Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D Hardware Maintenance
Manual
Figure 10. Speakers, base cover, function board, DC-IN board, volume board, LED board
and battery transfer board (continued)
When installing: When attaching the audio board to the base cover, adjust the
placement of the USB and headphone jacks as shown , and make sure that both
of the USB and the headphone jacks are attached to the holes on the base cover.
Improper placement of the jacks might cause a damage.
Remove screw
Remove screws
54
a to lift the volume board in the direction shown by arrow
a
b
Step Screw (quantity)
a
M2.5 × 3 mm, flat-head, nylok-coated (1)
(Flex 14)
a to lift the LED board in the direction shown by arrow
Step Screw (quantity)
a M2.5 × 3.0 mm, flat-head, nylok-coated (1)
(Flex 14)
a
b
Color Torque
Black 3.0+/-0.4 kgfcm
Color Torque
Black 3.0+/-0.4 kgfcm
b .
b .