Lenovo IdeaPad Flex 14 Hardware Maintenance Manual page 51

Figure 7. Removal steps of system board (continued)
Unplug sensor board and camera connector in the direction
board, volume board and touch pad connector in the direction
IN cable connector in the direction
f
direction , detach screen-lock board connector
h
,unplug speaker connector
When installing: Make sure that all the connectors are attached firmly.
Remove the system board in the direction shown by arrow
When installing: When attaching the system board to the base cover, adjust the
placement of the USB, HDMI, RJ-45 ports as shown in
that they are attached to the holes on the base cover as shown. Improper
placement of those jacks might cause a damage.
Lenovo Flex 14/Flex 14D/Flex 15/Flex 15D
e
, disconnect LCD connector in the
i
.
d
c
i
h
d
, detach function
c
, unplug DC-
g
and LED board connector
e
f
g
j .
j
c
b
a
, and make sure
47