Garrett ACE 350 Owner's Manual page 16

Walk slowly to allow
overlapping of your
searchcoil
28 Garrett Metal Detectors
Scan side
to side
approx.
3 ft per
second.
In order to fully search an area, overlap the swings of your searchcoil by
half the length of the coil (about 5.5 inches). Sweep the searchcoil in a
straight line or with a slight arc at a sweep speed of about 3 ft/sec.
• Isolating adjacent targets. The narrow detection field
of the ACE 350's DD searchcoil allows better separation of
adjacent targets versus a similar size concentric searchcoil.
Use narrow swings of the searchcoil in trashy areas to isolate
good targets amongst the trash.
29
ACE 350™