Kenwood DNX5260BT Instruction Manual page 38

TV Watching
[Enter] Executes selected menu item.
[Return] Returns to the previous screen.
[Exit] Returns to Digital TV screen.
⁄
• When using the remote control unit to operate the TV
menu, use the one of KTC-D500E.
Auto Memory
(only with KTC-V300E or KTC-V301E
(optional accessory) connected)
Stores stations with good reception in memory
automatically.
1 Display the Source
See <Source Control Screen> (page 37).
2 Select a band you wish to store in memory
3 Select the Auto Memory mode
4 Start Auto Memory
Auto Memory terminates when 6 stations are
stored or when all stations are tuned in.
⁄
• The operation ends automatically if you do not operate
within 10 seconds.
38 DNX5260BT/DDX5026/DDX5056
Control Screen
Manual Memory
(only with KTC-V300E or KTC-V301E
(optional accessory) connected)
Stores the current receiving channel in memory.
1 Display the Source
See <Source Control Screen> (page 37).
2 Select a station you wish to store in
memory
3 Store in memory
2 sec.
Continue to touch until the memory number
appears.
Control Screen