Icom IC-41S Instruction Manual page 9

r PTT SWITCH [PTT] (p. 12)
Push and hold to transmt; release to receve.
t CH UP/CH DOWN KEYS [CH UP]/[CH DOWN]
Push to select an operatng channel, set mode settng,
etc. (pgs. 11, 34)
y VOLUME CONTROL [VOL] (pgs. 10, 11)
Rotate to turn the power ON/OFF and adjusts the audo
level.
u EXTERNAL MICROPHONE/SPEAKER JACK
Connect an optonal speaker-mcrophone or headset.
NOTE: Connect or dsconnect the optonal equpment
after the transcever s turned OFF.
Jack cover
NOTE: Attach the jack cover when
the optional equipment is not used.
See (p. 3) for details.
i FUNCTION DISPLAY (p. 6)
Dsplays a varety of nformaton such as an operatng
channel number/name, SelCall code, selected functon, etc.
PANEL DESCRIPTION
o SCAN/TAG KEY*
N (Scan/Scan Tag)
➥ Push to start or stop the scan. (pgs. 19, 20)
➥ Push and hold for 2 sec. to set or clear the dsplayed
channel as a TAG (scanned) channel. (p. 18)
• "S" appears when the selected channel s tagged.
F (TX Code CH/Call)
➥ Push to enter the SelCall TX code channel selecton
mode, then push [CH Up] or [CH Down] to select. (CB
channel operaton only) (p. 25)
➥ Push and hold for 2 sec. to transmt to the SelCall TX
code channel. (CB channel operaton only) (p. 27)
!0 O•G•P/RS KEY*
N (Scan Mode/Rpt Scan)
➥ Push to select the scan type from open scan, group
scan and prorty scan n order. (p. 18)
• " " appears when the open scan s selected, "
pears when the group scan s selected, and "
when the prorty scan s selected.
➥ Push and hold for 2 sec. to start the repeater scan. (p. 21)
• Repeater output channel 'CB-R1' to 'CB-R8' operaton only
F (Quet/ID-MR)
➥ Push to toggle the quet functon ON or OFF. (CB chan-
nel 'CB-XX' operaton only) (p. 29)
• "Q" appears when the quet functon s turned ON.
➥ Push and hold for 2 sec. to enter the receved ID code
hstory ndcaton mode. (p. 28)
• "NO ID" s dsplayed when no ID code s memorzed.
2
2
" ap-
" appears
5