Foxconn P9657MA series Manual page 44

vUSB 1.0 Controller
This option is used to set whether the USB1.0 Controller is enabled. The
available setting values are: Disabled and Enabled.
vUSB 2.0 Controller
This option is used to set whether the USB 2.0 Controller is enabled.
vUSB Opreation Mode
This option is used to set the USB operation mode.
vUSB Keyboard Function
This option is used to set whether the USB keyboard controller is enabled in a
legacy operating system (such as DOS).
vUSB Mouse Function
This option is used to set whether the USB mouse controller is enabled in a
legacy operating system (such as DOS).
vUSB Storage Function
This opiton is used to set enable or disable the USB storage function.
vUSB Mass Storage Device Boot Setting
This option is used to set the simulation mode when boots from the USB
Device.
Chapter 3
SuperIO Device Menu
BIOS Description
37