Table of Contents
Advertisement
You must use the screws supplied with the mounting brackets. Damage
caused to the parts by using incorrect screws would invalidate your
Caution:
warranty.
Step3: Secure the brackets tightly.
Step4: Follow the same steps to attach the second bracket to the opposite side.
Step5: After the brackets are attached to the Switch, use suitable screws to securely
attach the brackets to the rack, as shown in figure 2-4.
Step6: Proceed with the steps 4 and steps 5 of section 2.2.1 Desktop Installation to
connect the network cabling and supply power to your Switch.
6
Figure 2-4 Mounting the Switch in a Rack
Advertisement
Table of Contents
