Sharp QT-MP5W Operation Manual page 20

Advanced CD or MP3/WMA disc playback (continued)
QT-MP5W
Programmed play
You can choose up to 32 selections for playback in the order you like.
1
Whilst in the stop mode, press the
MEMORY/DISP button to enter the
programming save mode.
2
Select a track by pressing the
or
3
Press the MEMORY/DISP button to save the track number.
4
Repeat steps 2 - 3 for other tracks and programmed num-
ber will automatically increase. Up to 32 tracks can be pro-
grammed.
"FULL" indicator will display on LCD after programmed up to 32
tracks.
If you make a mistake, the programmed tracks can be cleared
by pressing the STOP
11
MEMORY/DISP
MEMORY
TRACK
MEMORY
TRACK
button.
Selected track number
MEMORY
TRACK
button, "CLEAR" indicator will display.
5
Press the CD / button to start playback.
6
Press the STOP button.
The total number of memory will
appear.
7
Press the CD / button to start playback.
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indicator is lit, press the
STOP button. The "MEMORY" indicator will disappear and all the
programmed contents will be cleared.
Adding track to the programme:
If a programme has been previously stored, the "MEMORY" indicator
will be displayed. Then follow step 1 - 3 to add tracks. The new track
will be stored after the last track of the original programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the
or button.
Notes:
When you open the CD compartment, the programme is
automatically cancelled.
After you change the function from CD to another, the
programmed selections will be cleared.
During programme operation, random play is not possible. If
random button is press, this will cancelled the programmed play
mode.
MEMORY
TRACK
CD