Electrolux W465H Service Manual page 65

MACHINE ADDRESS
Specify with the knob the machine's address (0 - 127) that is used when
the machine is connected to the CMIS system.
PASSWORD
Select whether the functions under CONFIG 1 should be password protec-
ted or not.
The password comprises four numerals. The code 0000 means no pass-
word is required for the CONFIG 1 menu.
The password code can be changed or removed at any time.
SHOW WEIGHT TIME, SEC
Used for machines with weight count. Once weighing has been carried
out, the weight obtained is displayed over the specified time.
MAXDIFF.WASH TIME MIN
Specify with the knob the maximum time deviation for the total time of the
wash program. If this is exceeded in comparison with the total time when
the same wash program was last used, the stored total time shall only be
adjusted with the limit time. Note that this applies to both positive and
negative time.
The time is given in minutes; 0 - 20
DEFAULT HEAT
Select whether the machine should be heated with steam (heating contac-
tors 1/2) or electricity (heating contactor 3) as the default heating system.
Yes = Electricity.
No = Steam.
BACK LIGHT TIME SEC.
Specify how long in seconds that the display lighting should be on without
the control knob being activated. The value 0000 means that the lighting is
on all the time.
Program unit
65