Cooling Fans - Henny Penny ISLAND WARMER HMI-103 Technical Manual

2-11. SIDE GLASS REMOVAL

2-12. COOLING FANS

Step 3
Step 4
203
1. Remove front glass assy. per Front Glass Removal Section.
2. Pull side of glass straight up and out of brackets.
1. Remove electrical power supplied to the unit.
To avoid electrical shock or property damage, move
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
2. Remove the pans and pan supports from unit.
3. Remove four screws securing the access panel and
remove panel.
4. Slide cooling fan and bracket out of unit.
5. Remove cooling fan from bracket.
6. Install new cooling fan in reverse order.
Model HMI-103/105
2-7