Jensen VM9116 Operating Instructions Manual page 22

Hardware Sub-menu Features
If the rear-view video camera is connected, the unit is on, and the TFT monitor is
retracted inside the unit, the TFT monitor automatically moves into the viewing
position and Camera mode is selected upon shifting into REVERSE gear. When
shifting into DRIVE gear, the TFT monitor is retracted back inside unit.
Setting
Camera In
TFT Auto Open
Video Input (Input
circuitry auto detects the
video signal from the
Aux In source).
If the monitor is in display mode, the monitor automatically switches to CAMERA
mode upon reverse driving. When the reverse driving stops, the monitor return to
its original input mode.
22
Options Function
Normal Reverse the camera image as if looking
through a rear-view mirror.
Mirror
On
The TFT panel automatically opens
when the unit is turned on.
Off
You must press the OPEN button to
open the TFT panel.
Manual
When the ignition is turned OFF, the
TFT panel DOES NOT retract if it was
previously out.
NSTC
The color signals are output in the
standard NTSC format.
PAL
The color signals are output in the
standard PAL format.
Auto
The color signal output is switched
automatically based on the current
video input signal - NTSC or PAL.
VM9116