Table of Contents
Advertisement
SOURCE
Specify the device or MIDI data that will be the control source.
* If you use GK VOL, GK S1/S2, SUB CTL1, or SUB CTL2 as
the source, you must set the PEDAL parameter SUB CTL1 or
SUB CTL2 to "ASSIGNABLE" in the GK FUNC settings
SYNTH VOL, DOWN/S1 UP/S2, or SYSTEM (p. 36, 38).
MODE
Specifies the way in which the value will change as the
controller is operated.
For source other than GK S1/S2
NORMAL The value will be MAX while you press the ped-
al, and MIN when you release the pedal.
TOGGLE
The MIN value and MAX value will alternate
each time you press the pedal.
* When you are connecting FS-5L for SUB CTL 1 (or SUB CTL
2), set the MODE to "NORMAL." The MIN value and the
MAX value will alternate each time you press the pedal.
For GK S1/S2
DEC/INC
S1 will decrease the value, and S2 will increase
the value.
TOGGLE
S1 and S2 switches will function in a same way.
The MIN value and MAX value will alternate
each time you press S1/S2.
* If the GK setting parameter S1/S2 POSITION (p. 68) is set to
"REVERSE," the functions of S1 and S2 will be inverted.
ACTIVE RANGE
Specifies the valid range of the specified source device or
MIDI data.
LO
Specifies the minimum value of the valid range.
HI
Specifies the maximum value of the valid range.
NAME
Specify the patch name.
CHAIN
Specify the connection order of the effects.
LEVEL
Adjusts the volume level of the patch.
TEMPO
Specify the BPM for each patch.
* BPM stands for "beats per minute," and represents the
number of quarter notes played in one minute.
KEY
Specify the COSM BASS and EFFECT harmonist key.
fig.5-50
C
F
Major
Minor
Am
Dm
Major
G
Em
Minor
0–127
BASS IN
Adjusts the input volume of the normal pickkup.
Chapter 5. Parameter guide
MASTER
40BPM–250BPM, MIDI
C (Am)–B (G#m)
B
E
A
D
Gm
Cm
Fm
B m
D
A
E
B
Bm
F m
C m
G m
0–200
G
E m
F
D m
0–200
63
Advertisement
Table of Contents
