SettingTheClock - Jensen MP1516BT Owner's Manual

Loudness Control
Loudness automatically alters the frequency response curve of audio to make it
sound more natural when played at a lower volume level.
Press the volume knob or press the SEL button on the remote control until
1.
"LOUD OFF" appears on the display panel. This indicates that the loudness
function is OFF.
2. Rotate the volume knob to select ON or OFF.
Turning the Preset Beep Sound On or Off
An audible beep tone confirms each function selection.
1. Press the volume knob or press the SEL button on the remote control
repeatedly until "BEEP ON" appears on the display panel.
2. Rotate the volume knob to select "BEEP OFF" or "BEEP ON",
3. Leave the unit idle for the setting to take effect.

SettingtheClock

The time clock can be set anytime when the power is on.
Press the CLK/PTY button on the faceplate once (press and hold for more
1.
than 2 seconds during radio mode). The time will appear on the display panel.
2. Press and hold the CLK/PTYbutton until the hour blinks on the display panel.
Rotate the volume knob to set the hours.
3. Press the volume knob for the minutes to blink. Rotate the volume knob to set
the minutes.
4. Press the CLK/PTY button on the faceplate again or leave the unit idle for new
setting to take effect.
5. Press the CLK/PTY button on the faceplate anytime to view the time clock
display.
26