Connecting To An External Source; Speaker Connection; Connecting The Fm Aerial - Samsung MM-A15 User Manual

Micro component audio system cd/mp3-cd/wma-cd/cd-r/rw playback
Table of Contents

Advertisement

Connecting to an External Source

ENG
The auxiliary input can be used to take advantage of the sound quality
of your micro component system when listening to other sources.
Examples:
A television
A DVD player
A VCR
To connect to the external source, the source must have an audio
output.
1
Set the system to standby mode and disconnect it and the external
source from the main socket.
2
Connect the audio cable to the rear of the micro component system.
Connect the...
To the connector marked...
Red jack
R (right)
White jack
L (left)
For optimum sound quality, do not invert the right and left
channels.
3
Plug the system back into the main socket and press (
switch it on.
4
Select the AUX source by pressing AUX.
Result: AUX is displayed.
5
Switch the external source on.
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo (as if you
were in a cinema).
8

Speaker Connection

Main Speaker Connection: Connect the Speaker cords to the Main
Speaker jacks of System.
(Right Speaker)
) to
Directions in Installing Speaker
Installation in a place near heating apparatus, under direct lay of
light or with high humidity may cause performance degradation
of the speaker.
Do not install on the wall or on a high place of pole or other
unstable place to prevent any safety accident caused by falling
of the speaker.
The speaker near the TV or computer monitor may influence the
quality of the screen display.

Connecting the FM Aerial

How to connect a COAXIAL TYPE aerial.
Connect a 75Ω antenna to the FM antenna terminal.
Plug the connector on the FM aerial supplied into the coaxial socket (75Ω) marked FM on the rear of the system.
Follow the instructions given on Page 17 to tune into a radio station, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied).
(Left Speaker)
ENG
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents