Troubleshooting - Insignia NS-SB212 Quick Setup Manual

Connections
Choose the connection options below that fit your needs.
Caution: Turn off or unplug all components while you are making
connections.
RCA Audio connections
For an RCA audio connection, make the following connections with the
included RCA cable.
TV, projector, or
OUTPUT
AUDIO DVD/Blu-ray player
R L
RCA cable
(provided)
DC IN R L AUX IN
15.5V
RCA IN
SUBWOOFER OUT
OPTICAL IN
AUX IN connections
For connecting auxiliary devices, make the following connections with the
included 3.5mm audio cable.
DC IN R L
15.5V
RCA IN
SUBWOOFER OUT
Audio cable
(3.5 mm connectors)
(provided)
OUTPUT
TV, CD, MD, MP3 player,
AUDIO
smartphone, etc.
Digital connections
For a digital connection, make the following connections (cable not
included).
Note: If you use the OPTICAL IN connection, change the device's audio
output to 'PCM' format. Refer to the documentation you received with the
output device for additional information.
OUTPUT
DIGITAL
OPTICAL
Back panel of
DC IN R L AUX IN
15.5V
RCA IN
the soundbar
SUBWOOFER OUT
OPTICAL IN
Subwoofer connection
If connecting a subwoofer, make the following connections (cable not
included).
Note: A subwoofer is optional.
Subwoofer
DC IN R
15.5V
speaker cable
RCA IN
SUBWOOFER OUT
(not provided)
Notes:
• Make sure that the soundbar and all components are connected
correctly and securely.
Connecting the AC adapter
Cautions:
• Make sure that the electrical outlet matches the AC adapter's input
requirements of 100-240 V, 50/60 Hz before connecting.
• Use only the AC adapter provided.
• Plug in the AC adapter only after all other connections have been made.
To connect the AC adapter:
1 Connect the AC adapter to the DC IN jack on the back of the soundbar.
2 Plug the other end of the AC adapter into a power outlet.
Back panel of
the soundbar
Back panel of
AUX IN
the soundbar
OPTICAL IN
Using your soundbar
Listening to your soundbar:
1 Press the
The power indicator turns green.
2 Press the
select the sound source you want.
3 Turn on the sound source component connected to your soundbar and
begin playback. The sound plays through your soundbar.
4 Adjust the volume on your soundbar or the audio component to a
TV, projector, or
comfortable level.
DVD/Blu-ray player
Warning: Continuous use of high volume sound may permanently
damage your hearing.
5 Press the
indicator turns on.
Digital optical cable
(not provided)

Troubleshooting

For troubleshooting information, see your User Guide.
Back panel of
L AUX IN
the soundbar
OPTICAL IN
DC IN R L AUX IN
15.5V
RCA IN
(Power) button to turn on your soundbar or remote control.
button on the soundbar or the remote control repeatedly to
(Power) button again to turn off your soundbar. The standby
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product
is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC warning
Changes or modifications not expressly approved by the party responsible
for compliance with the FCC Rules could void the user's authority to operate
this equipment.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
One-year limited warranty
Visit www.insigniaproducts.com for details.
Contact Insignia:
For customer service, call 1-877-467-4289
www.insigniaproducts.com
© 2012 BBY Solutions, Inc., Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand names are trademarks of their
respective owners.
ENGLISH 12-0161