Insignia NS-SB316 Quick Setup Manual

PACKAGE CONTENTS
Wall mounting template
RCA audio cable
Soundbar
3.5 mm audio cable
AC adapter
Remote control
FEATURES
Top view
# DESCRIPTION
1
Standby indicator
2
(Power) button and
indicator
3
(source) button and
input source indicator
4
Sound mode indicator
and DSP (Digital Signal
Processor) button
Back view
5 VOL +/– buttons
6 BASS button and
indicator
7
Hanging brackets
8 SUBWOOFER OUT jack
9 DC IN jack
10 SOURCE 3 - RCA IN
(R and L) jacks
11 SOURCE 2 - AUX IN jack
12 SOURCE 1 - OPTICAL
Remote control
jack
13
(Power) button
14 SOURCE buttons
15 DSP buttons
16
(Mute) button
17 VOL +/– buttons
18 BASS button
Before using your new product, please read these instructions to prevent any damage.
CONNECTING THE SOUNDBAR
Look at the back of your source device, such as a TV, DVD/Blu-ray player, or cable box, to identify your
audio OUT ports. Choose one connection option below that fits your audio source. You can connect
FIND YOUR USER GUIDE
several devices and switch the sound source as needed.
ONLINE!
Caution: Turn off or unplug all devices while you are making connections.
Go to www.insigniaproducts.com,
then click Support & Service. Note: If you mounted your soundbar on a wall, you must use the included right-angle cable connectors for the AUX IN or
Enter NS-SB316 in the box under RCA cable connections.
Manual, Firmware, Drivers &
Quick Setup Guide Product Information, then click ►.
FUNCTION
- PICK ONE -
Lights when the soundbar is in standby mode.
Press to turn on the soundbar. The indicator turns green. Press again to
return the soundbar to standby mode. Digital connections (BEST)
Press repeatedly to cycle through the available sound sources:
1 Connect one end of the digital optical cable (not included)
• Source 1 - Optical
to your soundbar.
• Source 2 - AUX IN
2 Connect the other end into the Digital Optical Output
• Source 3 - RCA
• - Bluetooth port on your audio source device.
Indicates which source is selected to provide sound for the soundbar.
3 Change the device's audio output to 'PCM' format
Lights to indicate the DSP sound mode selected:
(typically found in Audio Settings). Refer to the
• Standard - Lets you enjoy normal sound.
documentation that came with your audio source device
• Theater - Best for enjoying movies. Bass frequencies are enhanced.
for more information.
• News - Select for clear voice reproduction.
Press repeatedly to cycle through the available DSP sound modes
(Standard>Theater>News).
Press to increase or decrease the volume of the soundbar.
Press to activate the bass frequency enhancement. The indicator turns
green. Press again to turn off the bass frequency enhancement.
- OR -
Use to hang the soundbar on a wall.
Connect a powered subwoofer to this jack.
3.5 mm connection (GOOD)
Connect the AC adapter to this jack to power the soundbar.
1 Connect the right-angled connectors of the
If your TV (or other audio source device) has RCA OUT jacks, connect the
3.5 mm audio cable to your soundbar.
RCA cables to your source device and these jacks.
2 Connect the other ends of the 3.5 mm audio
If your TV (or other audio source device) has an AUX OUT or headphone
cable into the Audio Output port or headphone
jack, connect the 3.5 mm audio cable to your source device and this jack.
jack on your audio source device.
If your TV (or other audio source device) has an Optical OUT jack, connect
a digital optical cable (not included) to your source device and this jack.
Press to turn on the soundbar. Press again to put the soundbar into
standby mode.
Press to select the sound source for your soundbar:
- OR -
• Source 1 - Optical • Source 3 - RCA
• Source 2 - AUX IN • - Bluetooth
Press to select the Digital Signal Processor (DSP) sound mode:
RCA connection (GOOD)
• Standard • Theater • News
1 Connect the right-angled connectors of the RCA audio
The corresponding indicator on the soundbar top panel lights to indicate
cable to your soundbar.
the sound mode selected.
2 Connect the other end of the RCA audio cable into the
Press to mute the sound from the soundbar. Press again to restore the
sound.
Audio Output ports on your audio source device.
Press to increase or decrease the volume of the soundbar.
Note: Make sure that the cable ends match the color of the ports.
Press to activate the bass frequency enhancement.
AUDIO QUALITY JACK TYPE (on source device) CABLE
BEST
Digital optical cable (not included)
GOOD
3.5 mm audio cable (included)
GOOD
RCA audio cable (included)
TV or DVD/Blu-ray
TV or DVD/Blu-ray
3.5 mm audio cable (included)
player
TV or DVD/Blu-ray
player
Soundbar Home Theater Speaker System with Bluetooth
CONNECTING A SUBWOOFER
(OPTIONAL)
Connect one end of the subwoofer cable (not
included) to the subwoofer and the other end
to the soundbar.
CONNECTING THE AC ADAPTER
Cautions:
player • Make sure that the electrical outlet matches the AC adapter's
input requirements of 100-240 V, 50/60 Hz before connecting.
• Use only the AC adapter provided.
• Plug in the AC adapter only after all other connections
have been made.
Digital optical cable
1 Connect the AC adapter to the DC IN jack
(not included)
on the back of the soundbar.
2 Plug the other end of the AC adapter into
a power outlet or surge protector.
4
CONNECTING YOUR SOUNDBAR USING BLUETOOTH (OPTIONAL)
Back of the soundbar
Pairing your devices
1 Turn on your soundbar.
2 Place your Bluetooth device within 30 ft. (10 m) of your soundbar.
Back of the soundbar
3 Select Bluetooth as the input source by pressing the (Bluetooth) button on the remote control or
the (source) button on the soundbar. The blue Bluetooth indicator on the soundbar blinks slowly.
4 Navigate to your device's Bluetooth settings, turn on Bluetooth, then search for available devices. For
additional information on pairing your device, refer to your devices' documentation.
5 On your Bluetooth device, select "NS-SB316" from the device list. Repeat steps 3-4 if "NS-SB316" is not
displayed.
6 If a PIN code is requested, enter "0000."
7 When pairing is completed the Bluetooth indicator on the top of your soundbar lights solid blue.
Notes:
• Some devices, such as an iPhone, connect immediately after pairing, other devices, such as notebook computers, may ask
you if you wish to connect. In this instance, the Bluetooth indicator continues to blink until a connection is established.
• When you turn on your soundbar, it automatically connects to the last connected device if that device is in range. To
connect to a different paired device, turn off Bluetooth or unpair from the currently paired device and manually connect
RCA audio cable
to the other paired device.
(included)
• When a call is received while playing music through a phone, the music stops automatically.
• When the call ends, depending on the setting of your phone, the current track may resume playback.
Disconnecting your devices
• Turn off the Bluetooth function on your device.
Note: For more information about using Bluetooth, see the online User Guide.
Back of the soundbar
Quick Setup Guide |
NS-SB316
Subwoofer
(not included)
Subwoofer cable
(not included)
Back of the soundbar
OVER