Insignia NS-SB212 Quick Setup Manual

Congratulations on your purchase of an
Insignia Soundbar Home Theater Speaker
System. Your NS-SB212 represents the
state of the art in home theater soundbars
and is designed for reliable and trouble-
free performance. See your User Guide for
more information on your Soundbar
Home Theater Speaker.
Package contents
• Soundbar
• AC adapter
• RCA audio cable
• 3.5 mm audio cable
• Mounting template
• Remote control
• User Guide
• Quick Setup Guide
Setting up your soundbar
Mounting the soundbar
Note: You must use suitable wall
anchors if you are mounting on
drywall, concrete, or other wall types.
You can also set the soundbar on a flat surface.
Features
Top view
S a t n d b y DSP S a t n d a d r T h e t a r e
Standby indicator Power DSP
indicator button
(Power) (Input) Sound field
button button indicator
Remote control
(Power) button
(Input) button
DSP buttons
To mount your soundbar on a wall:
1 Select a location close to your TV and directly in front of the
viewing/listening position. For best sound quality, choose a location
where sound waves are not blocked by furniture or other obstacles.
2 Tape the supplied wall mount template card to the wall temporarily.
The template shows you where to locate the two screw holes.
3 Drill two holes on the wall where the template indicates. The screws
should protrude from the wall approximately 1/4 in. (6-8 mm).
4 Secure two screws (not included) to the wall in the holes you just
drilled. The screws must protrude from the wall by about 1/4". The
screw width must about 3/16" and the screw head about 1/4" to 3/8".
Warning: Improper installation can result in serious injury or damage to
your soundbar. If necessary, seek the assistance of a professional.
Cautions:
• You must use suitable wall anchors if you are mounting on drywall,
concrete, or other wall types.
• If the soundbar is not mounted securely, there is a possibility that it
could fall.
Soundbar Home Theater Speaker NS-SB212
Back view
VOL
N e w s BASS
BASS button VOL +/– buttons
BASS
indicator
BASS button
VOL +/– buttons
(Mute) button
Quick Setup Guide
Hanging brackets
RCA IN
(R and L) jacks AUX IN jack
DC IN jack
DC IN R L AUX IN
15.5V
RCA IN
SUBWOOFER
SUBWOOFER OUT
OUT jack
Using the remote control
1 Remove the plastic tab from the battery compartment before using the
remote control for the first time.
2 Point the remote control directly at the IR sensor on the front of the
soundbar. You must be within approximately 23 ft. (7 m) of the soundbar.
IR sensor
Approximately
¼ in. (6-8 mm)
5 Align the speaker hanging brackets with the screws, then hang the
soundbar on the screws.
OPTICAL IN
OPTICAL IN
jack
16 in. (406 mm)
Wall