Installing The Soundtouch™ Sa-4 Amplifier; Installing The Soundtouch™ Wireless Adapter - Bose SoundTouch SA-4 Manual

Installing the SoundTouch™ SA-4 amplifier
Locate the SA-4 amplifier indoors, close to an AC (mains) power outlet. It does not
need to be close to your speakers.
The SoundTouch
™
on a shelf, or mounted on a wall. See page 30 for wall mounting instructions.
Consider the following caution statements when selecting a location for your
SA-4 amplifier.
CAUTIONS:
• The SA-4 amplifier must be used indoors. It is neither designed nor tested for
use outdoors, in recreational vehicles, or on boats.
• DO NOT mount the SA-4 amplifier on a surface that is not sturdy enough,
or that has hazards concealed behind it, such as electrical wiring or plumbing.
• The wireless adapter connects to the SA-4 amplifier with a 6 foot (1.8 m) cable.
Place the SA-4 amplifier so that the wireless adapter is within range of your
Wi-Fi router or network access point.
®
• Place the SA-4 amplifier and wireless adapter in an area where the maximum
ambient temperature is less than 104°F (40°C).
• For optimum performance, place the SA-4 amplifier in a well-ventilated area.
• DO NOT place the SA-4 amplifier in a completely enclosed area. If adequate
ventilation is not provided, the amplifier automatically protects itself by
reducing its volume level in order to limit its temperature.
• DO NOT place the SA-4 amplifier on any heat-sensitive surface, such as the
finished surface of fine furniture. Like all electrical equipment, it generates
some heat.
• DO NOT use the SA-4 amplifier in a damp location. It is important to prevent
moisture from getting into the system.
Installing the SoundTouch™ wireless adapter
The SoundTouch
™
SA-4 amplifier. It must remain in range of the Wi-Fi router, and within
70 feet (21 m) of the SoundTouch
To keep interference to a minimum and to increase the strength of the Wi-Fi
signal, install the wireless adapter outside of and away from metal cabinets,
away from other audio/video components, and away from direct heat sources.
See page 32 for wall mounting instructions.
Note: If you experience interference with your network connection, place
the SoundTouch
and away from metal objects. If problems persist, see "Troubleshooting"
on page 24.
SA-4 amplifier weighs 11 lbs (5 kg). It can be placed on a floor,
wireless adapter provides the network input for the
controller.
™
wireless adapter outside of any cabinet or enclosure
™
Setting up the System
English - 13