U s e r
M a n u a l
To setup a telephone on the POTS Splitter (DSL Microfilter):
a.
b.
c.
4.
Connect the power adapter from the router's 12V 1.0A DC port into the power
outlet.
5.
Press the ON/OFF switch to turn on the device.
The Web User Interface (GUI)
The layout and content positioning of the device's web user interface is mapped below.
Locate the phone jack in your house.
Insert the POTS Splitter into the phone jack.
Plug one end of the telephone cable from the POTS Splitter's TEL port
and then plug the other end into the telephone.
8