Table of Contents
Advertisement
Running
1. Release the parking brake by moving the lever
downward.
NoTE: The mower is equipped with an operator
presence system. When the engine is running,
any attempt by the operator to leave the seat
without first setting the parking brake will shut
off the engine.
2. Move the steering controls to the neutral
position (N).
3. Select the cutting height by setting the cutting
height pin into the desired hole. Release foot
pedal latch and lower deck to set cutting height.
4. Make sure the work area is free from objects
that could be thrown by the rotating blades.
WARNING!
Ensure that no one is near mower
when engaging blade switch.
5. Move throttle control to full throttle (rabbit
symbol).
6. Engage the mower deck by pulling out the
blade switch.
The machine's speed and direction are continuously
variable using the two steering controls. When both
controls are in the neutral position, the machine
stands still.
By moving both controls an equal amount forward
or backward, the machine moves in a straight line
forward or backward respectively.
OPeRaTION
Parking brake
Cutting height selection
Engage the mower deck and move the throttle to FULL
8058-044
8065-017
8065-016
29
Advertisement
Table of Contents
