Table of Contents
Advertisement
Running
1. Release the parking brake by moving the lever
downward.
NOTE: The mower is equipped with an operator
presence system. When the engine is running, any
attempt by the operator to leave the seat without
first setting the parking brake will shut off the
engine.
2. Move the steering controls inwards, out of the
neutral position (N).
3. Release foot pedal latch and lower deck to set
cutting height.
WARNING! Make sure that no one is near
mower when engaging blade switch.
Make sure the work area is free from objects
that could be thrown by the rotating blades.
4. Move throttle control to full throttle (rabbit symbol).
5. Engage the mower deck by pulling out the blade
switch.
30
OPERATION
Parking brake
Cutting height selection
Move the throttle to FULL and engage the mower deck
8058-182
8058-268
8058-216
Advertisement
Table of Contents
