Husqvarna Collection Kit 966610501 Operator And Parts Manual page 6

UNPACKING INSTRUCTIONS
• Remove all parts and packing materials from
carton.
• Check carton contents against list. Be sure all
parts are there.
TOOLS REQUIRED
•
½" Wrench (2)
•
/ " Socket
5
16
•
Drill
•
/ " Socket
9
16
•
Phillips Screwdriver
PARTS IDENTIFICATION
COVER
ASSEMBLY
BAG
CONTAINERS
NOTE: When right hand (RH) and left hand (LH) are
mentioned in this manual, it means when you are
seated on the mower in the operator's position.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
• Set parking brake.
• Place motion control levers in "NEUTRAL" position.
• Turn ignition key "OFF" and remove key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect spark plug and place wire where it cannot come in contact with
plug.
6
ASSEMBLY
•
/ " Wrench (2)
9
16
•
Ft/Lbs Torque Wrench
•
/ " Drill Bit
5
16
•
/ " Drill Bit
25
64
•
Ratchet
CONTAINER CONTENTS
2 - Soft bag containers
1 - Upper Chute
1 - Cover Assembly
UPPER
CHUTE
1 - Bag of Hardware
1 - Lower Chutes
1 - Mounting Hardware
LOWER
CHUTE