Husqvarna Collection Kit 966610501 Operator And Parts Manual page 10

8
LOWER CHUTE INSTALLATION
1. Raise and hold deflector shield in upright position.
2. Fit lower chute as shown and hook rear latch to
mower deck.
3. Align the bracket slot on lower chute with the
deflector bracket tab on the mower deck. Slide
chute down over tab.
4. With the lower chute in proper position, hold the
chute securely while hooking the front latch to the
mower deck.
NOTE: While hooking the latches, the deflector
shield may try to push the chute away from the
mower deck opening. It is important to hold the
chute in position while hooking the latches to
the mower deck.
Attach Rear Latch
here
10
ASSEMBLY
9
1.
2.
Deflector
Shield
Deflector
Bracket Tab
Front Latch
Rear Latch
CHUTE / HOOD INSTALLATION
Push upper chute through the gasketed opening
in the cover assembly.
Rotate chute so the chute opening is downwards
toward the container bags.
Hood
Inlet
Rotate upper chute to
point downwards
towards bags