Advertisement
TROUBLESHOOTING
GUIDE
Problem
Cause
Correction
No display on monitor
No speeding distance
displays on monitor.
Batteries weak or dead
Reed switch wire not
connected to monitor.
Reed switch not working
properly.
Monitor not working
Chain is too loose.
Chain makes popping
noise.
Bike rocks as you pedal
Bike is not level
It is not necessary to return entire bike for a monitor repair.
Replace batteries
Securely plug reed switch
wire into back of monitor.
Replace Reed Switch.
Replace Monitor.
Adjust Chain
See Chain
Adjustment
below.
Adjust leveling caps on
rear foot tube until bike
is level.
CHAIN ADJUSTMENT
Loosen RIGHT (41) and LEFT (42) CHAIN GUARDS
at center of fan wheel, loosen 3/8" nut on both sides
of bike. "nghten two 3/16" nuts at eyebolt on both
sides until slack is removed from chain.
Tighten up 3/8" nut on both sides.
Reattach both LEFT and RIGHT CHAIN GUARDS.
Hide quick links:
Advertisement
