Maintenance; General Care; Upholstery; Paintwork Of Frame - Pride Mobility C550 Owner's Manual

Recline and tilt wheelchair

Table of Contents

5. Maintenance

Proper care and maintenance is important to keep your wheelchair in good working condition.

Clean your wheelchair frequently, at least once a week, using a clean, dry, soft cloth. Do not use

harsh abrasive materials when cleaning. Dry the chair immediately if exposed to moisture.

Clean the upholstery with a mild soap solution, rinse and wipe dry. Worn or torn upholstery should be

replaced promptly as it may not support your body weight.

Paintwork and plastic mouldings can be cleaned with a damp soft cloth of warm soapy water. Do not

use any harsh abrasive cleaners, bleach base fluids or solvents.

Inspect the wheels and quick release axle shafts at least once a month. Correct any side play by

tightening the lock nut on the axle shaft just enough to remove the side play but still allowing the

wheel to turn freely. Check to see that the axle locks firmly into the axle receiver.

Broken spokes should be replaced immediately.

Ensure that the wheel locks are adjusted correctly.

We recommend that the chair has at least one full service from an authorized dealer once a year. If you

notice any irregular aspects of your chair, phone your nearest authorized dealer for assistance. They

will advise if the chair should be returned for repairs. If the chair is to be returned, they will advise on

the availability of replacement units, and the required method of packing and shipping.

Page 23 of 27

C550 Owner's manual_17_11_2011 English.doc

Table of Contents