Removing Excess Humidity - Samsung AW08NK Series User Manual

Removing Excess Humidity

Remote Control
Control Panel
10
E-
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
1
If necessary, press the
Result: The air conditioner starts up in the Cool mode.
The unit beeps.
The air conditioner is fitted with a protection mechanism to pre-
vent the unit from being damaged when it is started immediately
after being:
Plugged in
Stopped
It will begin to cool after three minutes.
2
If the temperature is not displayed on the control panel:
Press the button on the remote control
or
Press the button on the unit one or more times until
Result: The unit beeps each time you press the
The air conditioner starts up in the Cool mode.
You can change modes at any time.
3
To adjust the temperature, press the
more times until the required temperature is displayed.
The temperature can be set between 18°C and 30°C.
Result: Each time you press the
- The temperature is adjusted by 1°C
- The unit beeps
The air conditioner starts removing the excess humidity;
the quality of air is adjusted automatically.
4
To control the direction of the air flow, refer to page 11.
(On/Off) button.
or buttons one or
or buttons:
is displayed.
/ button.