Operation; Loading A Cassette Tape; Playing A Cassette Tape - Radio Shack Optimus CTR-109 Owner's Manual

14-1116.fm Page 8 Thursday, July 1, 1999 1:44 PM

OPERATION

LOADING A CASSETTE
TAPE
1. Take up any slack in the tape by
turning one of the cassette's hubs
with a pencil.
Caution: If you do not remove the
excess slack, the tape could
become tangled in the record/
playback mechanism.
2. Press
STOP/EJECT
cassette compartment door.
MICROPHONE
PLAY
RECORD REWIND FAST-F
REVIEW CUE
3. Load the cassette into the slot in
the door with its open edge out,
the side you want to play facing
up, and its full reel to the left.
4. Close the door.
8
PLAYING A CASSETTE
TAPE
1. Load the cassette tape.
2. Press
to open the
STOP PAUSE
EJECT
. The cassette plays
PLAY
until it reaches the end of the side,
then it automatically stops.
MIC CTR-109 CASSETTE RECORDER
AC / DC / BATTERY
RECORD PLAY STOP
REWIND FAST-F
REVIEW CUE EJECT
Notes:
• Press to temporarily
PAUSE
stop playback. Press
again to resume playback.
• If you hold down
or
REVIEW FAST-F/CUE
the tape is playing, you can
hear the tape as it moves at a
faster speed. This makes it
easy to locate a specific part of
a recording. When you release
or
REWIND/REVIEW
, the tape plays at its nor-
CUE
mal speed.
PAUSE
PAUSE
REWIND/
while
FAST-F/