Selecting The Sound Mode - Samsung CS29Z40 Owner's Instructions Manual

Picture - PIP
(depending on the model)
You can display a sub picture within the main picture of TV
programme or external A/V devices such as VCR or DVD. In
this way you can watch TV program or monitor the video input
from any connected devices while watching TV or other video
input.
Picture
T V T V
More PIP
▲
Film Mode : Off ► Source
PIP : Off ► Swap
Size
Position
Prog.
Move Enter Return Move
 PIP: On/Off 1
You can activate or deactivate the PIP function.
 Source 2
You can select a source of the sub-picture.
➢
Depending on the models, the sub-picture can be
viewed only when a source different from the main
picture's is selected. If a TV programme is viewed
on the main picture, the sub-picture is not available
for TV programmes. If a TV source is selected, the
message Not Available is displayed.
 Swap 3
You can interchange the main picture and sub-picture.
 Size: Large / Small / Double Window 4
You can select a size of the sub-picture.
 Position: / / /
6
You can select a position of the sub-picture.
 Prog. 5
You can select a channel of the sub-picture only when the
Source is set to TV.
Easy functions of the remote control
You can freeze the sub-picture.
Sound - Mode / Equalizer /
SRS TSXT / Auto Volume /
Turbo Sound / Pseudo Stereo
 Mode: Standard / Music /
Movie / Speech / Custom
You can select the type of
PIP
special sound effect to be
: On ►
used when watching a given
: TV ►
►
broadcast.
: Large ►
➢
You can select these
: ►
: P 1 options simply by pressing
the S.MODE button on the remote control.
Enter Return
 Equalizer
The television has several settings which allow you to
control the sound quality.
➢
If you make any changes to these settings, the sound
mode is automatically switched to Custom.
 SRS TSXT
TruSurround XT is a patented SRS technology that solves
the problem of playing 5.1 multichannel content over
two speakers. TruSurround delivers a compelling, virtual
surround sound experience through any two-speaker
playback system, including internal television speakers.
It is fully compatible with all multichannel formats.
➢
You can select these options simply by pressing the
SRS button.
☛
TruSurround XT, SRS and (
Symbol are trademarks of SRS Labs,
Inc. TruSurround XT technology is
incorporated under license from SRS Labs, Inc.
 Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
 Turbo Sound
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can enjoy
more magnificent and dynamic sound when watching
music, movie, or other channels.
➢
You can change the options simply by pressing the
TURBO button on the remote control.
 Pseudo Stereo
This feature converts a monaural sound signal into two
identical left and right channels. Once the Pseudo Stereo
is set to On or Off, these settings apply to the sound
effects such as Standard, Music, Movie, and Speech.
Sound
T V
Mode : Custom ►
Equalizer ►
SRS TSXT : Off ►
Auto Volume : Off ►
Turbo Sound : Off ►
Pseudo Stereo : Off ►
Move Enter Return
)
English - 6

Selecting the Sound Mode

(depending on the model)
The DUAL I-II button displays/
controls the processing and
output of the audio signal. When
power is switched on, the mode is
automatically preset to either "Dual-I " or "Stereo", depending
on the current transmission.
 NICAM Stereo
Type of broadcast On-screen indication
Regular broadcast Mono
(Standard audio) (Normal use)
Regular + Mono
↔
NICAM
NICAM Mono
Stereo
NICAM Stereo ↔
NICAM
Dual-I Dual-II
NICAM Dual-I/II ↔
NICAM NICAM
 A2 Stereo
Type of broadcast On-screen indication
Regular broadcast Mono
(Standard audio) (Normal use)
Bilingual or Dual-I/II Dual-I ↔
Stereo Stereo ↔
➢
 If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
 If the stereo signal is weak and an automatic
switching occurs, then switch to the Mono.
 When receiving a mono sound in the AV mode,
connect to the "AUDIO-L" input connector on the
panel (front or side). If the mono sound comes out
only from left speaker, press the DUAL I-II button.
Mono
(Normal)
Mono
(Normal)
Mono
↔
(Normal)
Dual-II
Mono
(Forced mono)