Picture Mode - Samsung CS29Z40 Owner's Instructions Manual

Setup - Time
 Clock Set
T V
You can set the television
Clock Set
Sleep Timer : Off
clock so that the current time
On Timer
is displayed when pressing
Off Timer
the INFO button on the
remote control. You must also
set the time if you wish to use
Move
the automatic on or off timers.
➢
When pressing the " " button (On/Off) on the front of
the television, the clock setting will be reset.
 Sleep Timer
You can select a time period of between 30 and 180
minutes after which the television automatically switches
to standby mode.
➢
You can select these options simply by pressing the
SLEEP button on the remote control. If the sleep timer
is not yet set, Off is displayed. If it is already set, the
remaining time before which the television switches to
standby mode is displayed.
 On Timer / Off Timer
You can set the On/Off timers so that the television will
switch on or off automatically at the time you select.
☛
You must set the clock first.
☛
Auto Power Off
When you set the timer "On", the TV will eventually turn
off, if no controls are operated for 3 hours after the TV was
turned on by timer. This function is only available in timer
"On" mode and prevents overheating, which may occur if a
TV is on for too long.
Setup -
Language / Blue Screen / Melody
Time
: -- : -- am ►
 Language
►
: Off ►
It is variable depending on
: Off ►
the model. When you start
using the television for the
first time, you must select the
Enter Return
language which will be used
for displaying menus and
indications.
 Blue Screen
If no signal is being received or the signal is very weak,
a blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor
2
picture, you must set the Blue Screen to Off.
1
 Melody
You can hear melody sound when the television is
powered on or off.
Picture - Mode
 Mode : Dynamic / Standard /
Movie / Custom
You can select the type
of picture which best
corresponds to your viewing
requirements.
➢
You can select these
options simply by
pressing the P.MODE button on the remote control.
 Contrast / Brightness / Sharpness / Colour /
Tint (NTSC only)
The television has several settings which allow you to
control the picture quality.
 Colour Tone : Cool2 / Cool1 / Normal / Warm1 / Warm2
 Reset
You can return to the factory defaults.
The reset function is set for each mode
(Dynamic, Standard, Movie, or Custom).
Setup
T V
Plug & Play ►
Language : English
Time ►
Blue Screen : On ►
Melody : On ►
Move Adjust Return
Mode
T V
Mode : Dynamic ►
Contrast : 90 ►
Brightness : 50 ►
Sharpness : 50 ►
Colour : 50 ►
▼ More
Move Enter Return
English - 5
Picture -
Size / Digital NR / DNIe/ Tilt / Film Mode
 Size:
T V
(depending on the model)
Mode
Nomal / Zoom1 / Zoom2 Size
Digital NR :
16:9 / Zoom1 / Zoom2 / 4:3
DNIe
(Wide model)
Tilt
You can select the picture size
which best corresponds to
Move
your viewing requirements.
It is variable depending on the model.
➢
You can change the picture size simply by pressing
the P.SIZE button on the remote control.
 Digital NR
If the signal received by the television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
 DNIe (depending on the model)
This feature bring you more detailed image with detail
enhancement, contrast enhancement and white
enhancement. New image compensation algorithm gives
brighter, clearer, much detailed image to you.
DNIe Jr technology will fit every signals into your eyes.
 Tilt (depending on the model)
If you find that the picture received is slightly tilted to one
side, you can adjust the tilt setting (-7 to +7).
 Film Mode
You can automatically sense and process film signals from
some sources and adjust the picture for optimum quality.
➢
 Not available in the Component or HDMI mode.
 Mode discrepancies, such as turning off Film
Mode while viewing a film source or turning on
Film Mode while viewing Non-film sources, may
affect the picture quality.
Picture
: Dynamic ►
: 16:9 ►
On ►
: Off ►
: 0
▼ More
Enter Return