Viewing The Connection Panel - Samsung LCD TV User Manual

Viewing the Connection Panel

¦
The product colour and shape may vary depending on the model.
N
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
N
When connecting an external device, match the colour of the connection terminal to the cable.
N
1 DIGITAL AUDIO OUT (OPTICAL)
– Connects to a Digital Audio component.
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV
N
and adjust the volume level with the system's volume control.
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
N
2 SERVICE
– Connector for service only.
3 HDMI / PC IN [HDMI(DVI), AUDIO, PC]
– Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
– No additional Audio connection is needed for an HDMI to HDMI connection.
– When using an HDMI / DVI cable connection, you must use the HDMI(DVI) jack.
– Connect to the audio output jack on your PC.
– DVI audio outputs for external devices.
4 AV IN [VIDEO] / [R-AUDIO-L]
– Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
– Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the
A/V device.
5 ANT IN
– To view television channels correctly, a signal must be received by the set from one of the following sources: An outdoor
aerial / A cable television network
6 KENSINGTON LOCK (depending on the model)
– The Kensington Lock (optional) is a device used to physically fix the system when used in a public place.
– If you want to use a locking device, contact the dealer where you purchased the TV.
– The location of the Kensington Lock may be different depending on its model.
7 H(HEADPHONE) (depending on the model)
– Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from
the built-in speakers will be disabled.
– Using the sound function is restricted when connecting headphones to the TV.
– Prolonged use of headphones at a high volume may damage your hearing.
– You will not hear sound from the speakers when you connect headphones to the TV.
– The headphone volume and TV volume are adjusted separately.
8 COMPONENT IN , 2
– Connect component video cables (optional) to component connector (P
to corresponding component video out connectors on the DVD.
– If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the
DVD to component connector (P
– The P , P
R B
– Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio
out connectors on the DVD.
[650_Aus]BN68-02089G-01Eng.indb 3
1 2
Power Input
, P , Y) on your set.
R B
and Y connectors on your component devices DVD are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
[TV Rear Panel]
3 4
8 7
, P , Y) on the rear of your set and the other ends
R B
English - 
5
6
2009-08-21 ¿ÀÈÄ 1:40:32